携帯端末情報(必須)/Mobile Device Information(Required)*
Samsung S23 Ultra, Android 15, One UI 7.0
アプリのバージョン(必須)/App Version(Required)*
v100.1-250616-1115
問題が発生する頻度/Frequency of the issue occurring
毎回/Every time
問題の詳細/Issue Details
Steps
- Go to Layered Equipment screen
- Take note of the current layered equipment loadout and the next one (either swipe left or right on the loadout bar).
- Select any one of the loadouts, then do the following quickly in rapid succession without pause:
a. Find a row of layered equipment that are separate, individual pieces and not set pieces.
b. Quickly tap and equip all the individual layered equipment you can see on the screen so that your layered equipment loadout is different from when you started these steps.
c. Quickly swipe left or right on the loadout bar to switch to another loadout that is known to be different from what you have selected in the previous step.
d. Quickly tap the Back arrow button to exit the Layered Equipment screen and return to the Equipment screen. - Now observe that the equipment visuals on the Equipment screen shows what you have selected at step 3b and not what you have switched to at step 3d.
- Go to Layered Equipment screen, and observe that the layered equipment loadout selected at step 3d has been changed to what you have selected at step 3b despite that step 3b was performed on a different layered equipment loadout, and now two loadouts have identical layered equipment, and therefore the loadout selected at step 3d has been incorrectly overwritten by the selections made in step 3b for another loadout.
Expected
- Changes made to a loadout set should not be reflected on other loadout sets without express intention from the user.
Notes
- It is also possible to cause a “loss of change” when performing similar steps but in a different order where it causes the changes you have made to a layered equipment loadout set to not be saved.
- In case it is confusing to anyone, all mentions of “loadouts” and “loadout sets” here are referring to Layered Equipment Loadouts, not the actual equipment loadouts.
Please see attached video.
その他の情報/Other Information
The only way to avoid this issue is to be very slow in making changes to the layered equipment.